{"title":"CTS-V Performance","description":null,"products":[{"product_id":"dsx-auxiliary-fuel-pump-kit-for-2009-2015-cts-v","title":"DSX – Auxiliary Fuel Pump Kit for 2009 – 2015 CTS-V","description":"\u003cdiv\u003e\u003cstrong\u003ePLEASE SPECIFY IF YOU HAVE A 2009-2010 MODEL YEAR AS THE FUEL LINE CONNECTION IS DIFFERENT!!!\u003c\/strong\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003eThe DSX Tuning Aux Pump Kit is the \u003cstrong\u003eoriginal\u003c\/strong\u003e and budget friendly alternative to big fuel supply with a simple installation.  There’s no need to get inside of the factory fuel tank, as this system taps into the tank and uses an external pump that ties back into the factory feed line.  With the help of the factory fuel pressure control module, the ECM always knows what your fuel pressure is even when the aux pump kicks on to give a huge boost in pressure and flow.\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eThe heart of the system is a DSX Tuning proprietary PnP controller that plugs into the MAP sensor.\u003c\/strong\u003e  There’s no need to tap vacuum lines or install a Hobbs switch as the DSX Tuning controller utilizes the electrical signal from the MAP to trigger the pump.  The controller is incorporated into an easy to install harness with minimal connections to ensure the end user doesn’t have to do any wiring.  The pump is activated at 9psi (164kPa) and shuts off when falling below 7psi.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eThe system features smooth bore PTFE coated crimped fuel lines to ensure leak free operation and corrosion resistance against ethanol for the life of the vehicle as well as inhibit any fuel odor from permeating through the lines.\u003c\/strong\u003e  These lines are pressure tested by the manufacturer to verify against defects, so you can be sure that what you receive is the highest quality and rated for any fuel you will run through it. These lines are 8AN in size but use 6AN connections to allow full flow even through the fitting itself (typical 6AN lines and ends are significantly smaller internally when inserted in the hose). Don’t be fooled by lower quality push lock, screw together, or plain braided hoses! DSX Tuning is committed to providing purpose built products and not repurposed pieces or a collection of off the shelf components bundled together. The filter is a custom made 74 micron filter exclusively for use with these pumps, and the one piece billet tee fitting is a true push connect piece made exclusively for this application.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003eThe pump is mounted under the vehicle, and all mounting hardware is supplied so the user has a 100% complete kit to perform the installation. These systems now feature an original DSX designed and manufactured push connect tee to simplify the installation and reduce potential leak points. Drilling the fuel tank is required for installation, and an available drill and tap is available for an extra charge. Don’t settle for imitations!\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003eInstallation time is roughly two hours and can be done on jack stands.  It is recommended to have a low level of fuel in the tank before installation.\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003eThis kit can be installed prior to tuning, but in order to take full advantage you will need HP Tuners or EFILive tuning software and access to a dyno \/ competent tuner.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Fireball Performance Parts","offers":[{"title":"255 LPH \/ 2009-2010","offer_id":45142753181719,"sku":null,"price":1050.0,"currency_code":"USD","in_stock":true},{"title":"320 LPH \/ 2009-2010","offer_id":45142753214487,"sku":null,"price":1102.0,"currency_code":"USD","in_stock":true},{"title":"255 LPH \/ 2011-2015","offer_id":45142753312791,"sku":null,"price":1050.0,"currency_code":"USD","in_stock":true},{"title":"320 LPH \/ 2011-2015","offer_id":45142753345559,"sku":null,"price":1102.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/7796\/3799\/files\/IMG-3939.webp?v=1778933624"},{"product_id":"dsx-auxiliary-fuel-pump-kit-for-2016-cts-v","title":"DSX – Auxiliary Fuel Pump Kit for 2016+ CTS-V","description":"","brand":"Fireball Performance Parts","offers":[{"title":"255 LPH","offer_id":45142755377175,"sku":null,"price":1050.0,"currency_code":"USD","in_stock":true},{"title":"320 LPH","offer_id":45142755409943,"sku":null,"price":1102.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/7796\/3799\/files\/IMG-3939.webp?v=1778933624"},{"product_id":"johnson-set-of-16-drop-in-slow-leakdown-rate-lifter-2110r","title":"Johnson – Set of 16 Drop In Slow Leakdown Rate Lifter (2110R)","description":"","brand":"Fireball Performance Parts","offers":[{"title":"Default Title","offer_id":45143774691351,"sku":null,"price":766.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/7796\/3799\/files\/IMG-3982.jpg?v=1778984260"},{"product_id":"johnson-ls-slow-leakdown-link-bar-lifter-set-2116lsr","title":"Johnson – LS Slow Leakdown Link Bar Lifter Set (2116LSR)","description":"","brand":"Fireball Performance Parts","offers":[{"title":"Default Title","offer_id":45143778131991,"sku":null,"price":848.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/7796\/3799\/files\/IMG-3984.webp?v=1778984405"},{"product_id":"oem-style-ls2-and-newer-lifter-trays-12595365","title":"OEM Style – LS2 and Newer Lifter Trays (12595365)","description":"\u003cp\u003eSold as a full set! \u003c\/p\u003e","brand":"Fireball Performance Parts","offers":[{"title":"Default Title","offer_id":45143783342103,"sku":null,"price":63.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/7796\/3799\/files\/IMG-3985.jpg?v=1778984519"},{"product_id":"arp-stainless-steel-header-stud-kits-434-1301","title":"ARP – Stainless Steel Header Stud Kits (434-1301)","description":"","brand":"Fireball Performance Parts","offers":[{"title":"Default Title","offer_id":45143850450967,"sku":null,"price":148.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/7796\/3799\/files\/IMG-3992.jpg?v=1778986530"},{"product_id":"che-trunnion-kit-ls-gen-v-lt","title":"CHE - Trunnion Kit (LS\/Gen V LT)","description":"\u003cp\u003eThe CHE is a full floating bushing design, and DOES NOT require any special tools.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eThe CHE is the superior bushing in our opinion, and is our recommendation if you plan to upgrade.\u003c\/b\u003e\u003c\/p\u003e","brand":"Fireball Performance Parts","offers":[{"title":"Default Title","offer_id":45152091242519,"sku":null,"price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/7796\/3799\/files\/CB198D80-1218-4F83-84AD-1FE90FFB8F5E.jpg?v=1779245101"},{"product_id":"smith-brothers-ls-lt-gen-5-bronze-trunnion-upgrade-kit","title":"Smith Brothers LS \/ LT (Gen 5) Bronze Trunnion Upgrade Kit","description":"\u003cp\u003e\u003cspan\u003eThe Smith Brothers is a press in bushing design, which DOES requires special tools for installation.\u003c\/span\u003e\u003c\/p\u003e","brand":"Fireball Performance Parts","offers":[{"title":"Default Title","offer_id":45152094191639,"sku":null,"price":203.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/7796\/3799\/files\/6D7823F7-A73B-4A95-ABDF-DE68A66524B3.jpg?v=1779245102"},{"product_id":"oem-style-ls2-and-newer-lifter-trays-12595365-4","title":"OEM Style - LS2 and Newer Lifter Trays (12595365) × 4","description":"\u003ch4 class=\"composited_product_title component_section_title product_title\" aria-label=\"Your selection: OEM Style - LS2 and Newer Lifter Trays (12595365)\" tabindex=\"-1\"\u003eOEM Style - LS2 and Newer Lifter Trays (12595365) × 4\u003c\/h4\u003e","brand":"Fireball Performance Parts","offers":[{"title":"Just One","offer_id":45152101761047,"sku":null,"price":15.99,"currency_code":"USD","in_stock":true},{"title":"Full kit x4","offer_id":45152101793815,"sku":null,"price":63.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/7796\/3799\/files\/22C147B3-F515-45BE-AD34-FCFD26EB9464.jpg?v=1779245102"},{"product_id":"chevrolet-performance-front-crankshaft-engine-oil-seal-12634614","title":"Chevrolet Performance - Front Crankshaft Engine Oil Seal (12634614)","description":"","brand":"Fireball Performance Parts","offers":[{"title":"Default Title","offer_id":45152104251415,"sku":null,"price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/7796\/3799\/files\/C1E6CE70-3833-44E3-AD0D-426AB8E4CC02.png?v=1779245102"},{"product_id":"fast-fish-gm-ls-front-timing-cover-seal","title":"Fast Fish - GM LS Front Timing Cover Seal","description":"","brand":"Fireball Performance Parts","offers":[{"title":"Default Title","offer_id":45152104415255,"sku":null,"price":39.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/7796\/3799\/files\/C1E6CE70-3833-44E3-AD0D-426AB8E4CC02.png?v=1779245102"},{"product_id":"chevrolet-performance-lsx-timing-cover-damper-seal-12585673","title":"Chevrolet Performance - LSx Timing Cover\/Damper Seal (12585673)","description":"","brand":"Fireball Performance Parts","offers":[{"title":"Default Title","offer_id":45152104480791,"sku":null,"price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/7796\/3799\/files\/C1E6CE70-3833-44E3-AD0D-426AB8E4CC02.png?v=1779245102"},{"product_id":"brian-tooley-racing-lifter-trays-set-of-4-btr95365-4","title":"BRIAN TOOLEY RACING LIFTER TRAYS - SET OF 4 - BTR95365-4","description":"\u003cp\u003eFull set!\u003c\/p\u003e","brand":"Fireball Performance Parts","offers":[{"title":"Default Title","offer_id":45152108642327,"sku":null,"price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/7796\/3799\/files\/IMG-4140.jpg?v=1779249799"},{"product_id":"lme-lsr-388-2000-hp","title":"LME LSR 388\" 2000+HP","description":"\u003cp\u003eOur 388\" LSR Shortblock is a proven combination to get more cubic inches and power for your ride. This block will go into any LS-powered vehicle! Any LS1,LS2,LS3,LSA,LS7 or LS9 can be pulled out and replaced with this stout unit! This engine is set up for a forced induction application. Supercharger, turbos, procharger it doesn’t matter this engine will take it. The aluminum block saves weight for those applications in need of weight savings.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable border=\"0\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"141\"\u003e \u003ccol width=\"299\"\u003e \u003ccol width=\"139\"\u003e \u003ccol width=\"334\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"xl66\" width=\"141\" height=\"20\"\u003e\u003cspan\u003e\u003cstrong\u003eDisplacement:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd width=\"299\"\u003e\u003cspan\u003e388\"\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl66\" width=\"139\"\u003e\u003cspan\u003e\u003cstrong\u003eBore:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl69\" width=\"334\"\u003e\u003cspan\u003e4.125\"\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"xl66\" height=\"20\"\u003e\u003cspan\u003e\u003cstrong\u003eProven Power Rating:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e2000+ HP\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl66\"\u003e\u003cspan\u003e\u003cstrong\u003eStroke:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl67\"\u003e\u003cspan\u003e3.625\"\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"xl66\" height=\"20\"\u003e\u003cspan\u003e\u003cstrong\u003eCompression Ratio:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e10.5:1 w\/ 64cc Chamber\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl65\"\u003e\u003cspan\u003e\u003cstrong\u003eRod Length\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl67\"\u003e\u003cspan\u003e6.125\"\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"xl68\" width=\"141\" height=\"40\"\u003e\u003cspan\u003e\u003cstrong\u003eCylinder Head Compatibility:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl67\"\u003e\u003cspan\u003eAny LS\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl65\"\u003e\u003cspan\u003e\u003cstrong\u003eOil System Type:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl67\"\u003e\u003cspan\u003eWet or Dry\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003chr\u003e\n\u003ctable border=\"0\" cellspacing=\"0\" cellpadding=\"0\" style=\"width: 100.088%; height: 278px;\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"141\" style=\"width: 24.9117%;\"\u003e \u003ccol width=\"299\" style=\"width: 52.8269%;\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 20px;\"\u003e\n\u003ctd class=\"xl65\" height=\"20\" style=\"height: 20px;\"\u003e\u003cspan\u003e\u003cstrong\u003eBlock:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl66\" style=\"height: 20px;\"\u003e\u003cspan\u003eConcept Performance LSR Block\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 40px;\"\u003e\n\u003ctd class=\"xl65\" height=\"40\" style=\"height: 40px;\"\u003e\u003cspan\u003e\u003cstrong\u003eCrankshaft:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl66\" style=\"height: 40px;\"\u003e\u003cspan\u003eCallies Magnum 8 Counterweight w\/ LME Blueprinting Process\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 40px;\"\u003e\n\u003ctd class=\"xl65\" height=\"40\" style=\"height: 40px;\"\u003e\u003cspan\u003e\u003cstrong\u003eConnecting Rods:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl66\" style=\"height: 40px;\"\u003e\u003cspan\u003eDyers 300M 6.125\" w\/ARP  Bolts\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 40px;\"\u003e\n\u003ctd class=\"xl65\" height=\"40\" style=\"height: 40px;\"\u003e\u003cspan\u003e\u003cstrong\u003ePistons:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl66\" style=\"height: 40px;\"\u003e\u003cspan\u003eLME\/Diamond 2K Custom Forged FI w\/Gas Ports (.300\" material above top ring land)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 27px;\"\u003e\n\u003ctd class=\"xl65\" height=\"27\" style=\"height: 27px;\"\u003e\u003cspan\u003e\u003cstrong\u003eWrist Pins:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl66\" style=\"height: 27px;\"\u003e\u003cspan\u003eTrend H-13 Tool Steel Heavy Wall .250\"\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 40px;\"\u003e\n\u003ctd class=\"xl65\" height=\"40\" style=\"height: 40px;\"\u003e\u003cspan\u003e\u003cstrong\u003eRing Pack:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl66\" style=\"height: 40px;\"\u003e\u003cspan\u003eTotal Seal 1.5mm AP Stainless Top (for high heat applications) .043\" Ductil Napier Second, 3mm Oil\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 40px;\"\u003e\n\u003ctd class=\"xl65\" height=\"40\" style=\"height: 40px;\"\u003e\u003cspan\u003e\u003cstrong\u003eBearings:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl66\" style=\"height: 40px;\"\u003e\u003cspan\u003eClevite H-Series Main \u0026amp; Rods\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 31px;\"\u003e\n\u003ctd class=\"xl65\" height=\"31\" style=\"height: 31px;\"\u003e\u003cspan\u003e\u003cstrong\u003eMain Studs:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl66\" style=\"height: 31px;\"\u003e\u003cspan\u003eARP \u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan id=\"docs-internal-guid-ff7e31f8-5259-062b-ae32-cbcb4d4326ff\"\u003eLME Standard Shortblock Blueprinting Process:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable border=\"1\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"*\"\u003e \u003ccol width=\"*\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBlock is fully deburred \u0026amp; inspected for flaws\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCylinders diamond honed with torque plates for optimal clearance per application\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCrankshaft journals indexed \u0026amp; trued to exact tolerance\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOptimal cylinder geometry achieved with diamond hone and surface finish verified with profilometer\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eChamfered oil holes for improved oiling to bearings\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCylinders machined for rod clearance per application\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCrankshaft journals polished to 2 Ra or better surface finish\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBlock and components meticulously deburred \u0026amp; cleaned after machining process\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCrankshaft balanced within ¼ oz-in tolerance\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll five main bearings \u0026amp; all eight rod bearing clearances measured and adjusted for application\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eConnecting rod housing bores checked \u0026amp; adjusted for optimal roundness \u0026amp; size\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRing are precision file fit per application\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePiston pin bores measured \u0026amp; adjusted for application\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCam bearings installed and test cam fitted to ensure smooth rotation\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBlock aline honed and set to low of spec for maximun bearing crush\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll oil galley plugs and dowel pins installed\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDeck surfaces machined perpendicular to mains \u0026amp; deck height set for optimal quench\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMeticulous final assembly of shortblock\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCylinders bored (when applicable) on 4 axis CNC perpendicular to mains giving you a true 90\u003csup\u003eo\u003c\/sup\u003e  V8\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll tolerances, clearances, machining specs, and part numbers are recorded and documented in build sheet\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Late Model Engines","offers":[{"title":"Default Title","offer_id":45164710101015,"sku":"LME LSR 388\" 2000 Shortblock","price":19795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/7796\/3799\/files\/LSR_8eaa4079-806c-4368-9970-3158fdc455b7.png?v=1779565467"},{"product_id":"lme-lsr-400-2000-hp","title":"LME LSR 400\" 2000+HP","description":"\u003cp\u003eOur 400\" LSR Shortblock is a proven combination to get more cubic inches and power for your ride. This block will go into any LS-powered vehicle! Any LS1,LS2,LS3,LSA,LS7 or LS9 can be pulled out and replaced with this stout unit! This engine is set up for a forced induction application. Supercharger, turbos, procharger it doesn’t matter this engine will take it. The aluminum block saves weight for those applications in need of weight savings.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable border=\"0\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"141\"\u003e \u003ccol width=\"299\"\u003e \u003ccol width=\"139\"\u003e \u003ccol width=\"334\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"xl66\" width=\"141\" height=\"20\"\u003e\u003cspan\u003e\u003cstrong\u003eDisplacement:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd width=\"299\"\u003e\u003cspan\u003e400\"\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl66\" width=\"139\"\u003e\u003cspan\u003e\u003cstrong\u003eBore:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl69\" width=\"334\"\u003e\u003cspan\u003e4.125\"\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"xl66\" height=\"20\"\u003e\u003cspan\u003e\u003cstrong\u003eProven Power Rating:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e2000+ HP\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl66\"\u003e\u003cspan\u003e\u003cstrong\u003eStroke:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl67\"\u003e\u003cspan\u003e3.750\"\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"xl66\" height=\"20\"\u003e\u003cspan\u003e\u003cstrong\u003eCompression Ratio:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e10.5:1 w\/ 64cc Chamber\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl65\"\u003e\u003cspan\u003e\u003cstrong\u003eRod Length\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl67\"\u003e\u003cspan\u003e6.125\"\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"xl68\" width=\"141\" height=\"40\"\u003e\u003cspan\u003e\u003cstrong\u003eCylinder Head Compatibility:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl67\"\u003e\u003cspan\u003eAny LS\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl65\"\u003e\u003cspan\u003e\u003cstrong\u003eOil System Type:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl67\"\u003e\u003cspan\u003eWet or Dry\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003chr\u003e\n\u003ctable border=\"0\" cellspacing=\"0\" cellpadding=\"0\" style=\"width: 100.088%; height: 278px;\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"141\" style=\"width: 24.9117%;\"\u003e \u003ccol width=\"299\" style=\"width: 52.8269%;\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 20px;\"\u003e\n\u003ctd class=\"xl65\" height=\"20\" style=\"height: 20px;\"\u003e\u003cspan\u003e\u003cstrong\u003eBlock:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl66\" style=\"height: 20px;\"\u003e\u003cspan\u003eConcept Performance LSR Block\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 40px;\"\u003e\n\u003ctd class=\"xl65\" height=\"40\" style=\"height: 40px;\"\u003e\u003cspan\u003e\u003cstrong\u003eCrankshaft:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl66\" style=\"height: 40px;\"\u003e\u003cspan\u003eCallies Magnum 8 Counterweight w\/ LME Blueprinting Process\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 40px;\"\u003e\n\u003ctd class=\"xl65\" height=\"40\" style=\"height: 40px;\"\u003e\u003cspan\u003e\u003cstrong\u003eConnecting Rods:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl66\" style=\"height: 40px;\"\u003e\u003cspan\u003eDyers 300M 6.125\" w\/ARP  Bolts\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 40px;\"\u003e\n\u003ctd class=\"xl65\" height=\"40\" style=\"height: 40px;\"\u003e\u003cspan\u003e\u003cstrong\u003ePistons:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl66\" style=\"height: 40px;\"\u003e\u003cspan\u003eLME\/Diamond 2K Custom Forged FI w\/Gas Ports (.300\" material above top ring land)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 27px;\"\u003e\n\u003ctd class=\"xl65\" height=\"27\" style=\"height: 27px;\"\u003e\u003cspan\u003e\u003cstrong\u003eWrist Pins:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl66\" style=\"height: 27px;\"\u003e\u003cspan\u003eTrend H-13 Tool Steel Heavy Wall .250\"\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 40px;\"\u003e\n\u003ctd class=\"xl65\" height=\"40\" style=\"height: 40px;\"\u003e\u003cspan\u003e\u003cstrong\u003eRing Pack:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl66\" style=\"height: 40px;\"\u003e\u003cspan\u003eTotal Seal 1.5mm AP Stainless Top (for high heat applications) .043\" Ductil Napier Second, 3mm Oil\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 40px;\"\u003e\n\u003ctd class=\"xl65\" height=\"40\" style=\"height: 40px;\"\u003e\u003cspan\u003e\u003cstrong\u003eBearings:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl66\" style=\"height: 40px;\"\u003e\u003cspan\u003eClevite H-Series Main \u0026amp; Rods\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 31px;\"\u003e\n\u003ctd class=\"xl65\" height=\"31\" style=\"height: 31px;\"\u003e\u003cspan\u003e\u003cstrong\u003eMain Studs:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl66\" style=\"height: 31px;\"\u003e\u003cspan\u003eARP \u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan id=\"docs-internal-guid-ff7e31f8-5259-062b-ae32-cbcb4d4326ff\"\u003eLME Standard Shortblock Blueprinting Process:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable border=\"1\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"*\"\u003e \u003ccol width=\"*\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBlock is fully deburred \u0026amp; inspected for flaws\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCylinders diamond honed with torque plates for optimal clearance per application\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCrankshaft journals indexed \u0026amp; trued to exact tolerance\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOptimal cylinder geometry achieved with diamond hone and surface finish verified with profilometer\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eChamfered oil holes for improved oiling to bearings\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCylinders machined for rod clearance per application\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCrankshaft journals polished to 2 Ra or better surface finish\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBlock and components meticulously deburred \u0026amp; cleaned after machining process\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCrankshaft balanced within ¼ oz-in tolerance\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll five main bearings \u0026amp; all eight rod bearing clearances measured and adjusted for application\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eConnecting rod housing bores checked \u0026amp; adjusted for optimal roundness \u0026amp; size\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRing are precision file fit per application\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePiston pin bores measured \u0026amp; adjusted for application\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCam bearings installed and test cam fitted to ensure smooth rotation\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBlock aline honed and set to low of spec for maximun bearing crush\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll oil galley plugs and dowel pins installed\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDeck surfaces machined perpendicular to mains \u0026amp; deck height set for optimal quench\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMeticulous final assembly of shortblock\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCylinders bored (when applicable) on 4 axis CNC perpendicular to mains giving you a true 90\u003csup\u003eo\u003c\/sup\u003e  V8\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll tolerances, clearances, machining specs, and part numbers are recorded and documented in build sheet\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Late Model Engines","offers":[{"title":"Default Title","offer_id":45164710330391,"sku":"LME LSR 400\" 2000 Shortblock","price":19795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/7796\/3799\/files\/LSR_17ecad17-1f61-4c74-a641-e78f0a44c885.png?v=1779565471"},{"product_id":"lme-dart-shp-pro-388-2000-hp","title":"LME DART SHP PRO 388\" 2000+HP","description":"\u003cp\u003eOur 388\" DART SHP PRO Shortblock is a proven combination to get more cubic inches and power for your ride. This block will go into any LS-powered vehicle! Any LS1,LS2,LS3,LSA,LS7 or LS9 can be pulled out and replaced with this stout unit! This engine is set up for a forced induction application. Supercharger, turbos, procharger it doesn’t matter this engine will take it. The aluminum block saves weight for those applications in need of weight savings.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable cellpadding=\"0\" cellspacing=\"0\" border=\"0\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"141\"\u003e \u003ccol width=\"299\"\u003e \u003ccol width=\"139\"\u003e \u003ccol width=\"334\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"141\" class=\"xl66\"\u003e\u003cspan\u003e\u003cstrong\u003eDisplacement:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd width=\"299\"\u003e\u003cspan\u003e388\"\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd width=\"139\" class=\"xl66\"\u003e\u003cspan\u003e\u003cstrong\u003eBore:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd width=\"334\" class=\"xl69\"\u003e\u003cspan\u003e4.125\"\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" class=\"xl66\"\u003e\u003cspan\u003e\u003cstrong\u003eProven Power Rating:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e2000+HP\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl66\"\u003e\u003cspan\u003e\u003cstrong\u003eStroke:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl67\"\u003e\u003cspan\u003e3.625\"\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" class=\"xl66\"\u003e\u003cspan\u003e\u003cstrong\u003eCompression Ratio:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e10.5:1 w\/ 64cc Chamber\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl65\"\u003e\u003cspan\u003e\u003cstrong\u003eRod Length\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl67\"\u003e\u003cspan\u003e6.125\"\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"40\" width=\"141\" class=\"xl68\"\u003e\u003cspan\u003e\u003cstrong\u003eCylinder Head Compatibility:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl67\"\u003e\u003cspan\u003eLT1, LT4\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl65\"\u003e\u003cspan\u003e\u003cstrong\u003eOil System Type:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl67\"\u003e\u003cspan\u003eWet or Dry\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003chr\u003e\n\u003ctable style=\"width: 100.088%; height: 278px;\" cellpadding=\"0\" cellspacing=\"0\" border=\"0\"\u003e\n\u003ccolgroup\u003e \u003ccol style=\"width: 24.9117%;\" width=\"141\"\u003e \u003ccol style=\"width: 52.8269%;\" width=\"299\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 20px;\"\u003e\n\u003ctd style=\"height: 20px;\" height=\"20\" class=\"xl65\"\u003e\u003cspan\u003e\u003cstrong\u003eBlock:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 20px;\" class=\"xl66\"\u003e\u003cspan\u003eDART SHP PRO\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 40px;\"\u003e\n\u003ctd style=\"height: 40px;\" height=\"40\" class=\"xl65\"\u003e\u003cspan\u003e\u003cstrong\u003eCrankshaft:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 40px;\" class=\"xl66\"\u003e\u003cspan\u003eCallies Magnum 8 Counterweight w\/ LME Blueprinting Process\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 40px;\"\u003e\n\u003ctd style=\"height: 40px;\" height=\"40\" class=\"xl65\"\u003e\u003cspan\u003e\u003cstrong\u003eConnecting Rods:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 40px;\" class=\"xl66\"\u003e\u003cspan\u003eDyers 300M Rods w\/ARP  Bolts\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 40px;\"\u003e\n\u003ctd style=\"height: 40px;\" height=\"40\" class=\"xl65\"\u003e\u003cspan\u003e\u003cstrong\u003ePistons:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 40px;\" class=\"xl66\"\u003e\u003cspan\u003eLME\/Diamond 2K Custom Forged FI w\/Gas Ports (.300\" material above top ring land)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 27px;\"\u003e\n\u003ctd style=\"height: 27px;\" height=\"27\" class=\"xl65\"\u003e\u003cspan\u003e\u003cstrong\u003eWrist Pins:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 27px;\" class=\"xl66\"\u003e\u003cspan\u003eTrend H-13 Tool Steel Heavy Wall .250\"\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 40px;\"\u003e\n\u003ctd style=\"height: 40px;\" height=\"40\" class=\"xl65\"\u003e\u003cspan\u003e\u003cstrong\u003eRing Pack:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 40px;\" class=\"xl66\"\u003e\u003cspan\u003eTotal Seal 1.5mm AP Stainless Top (for high heat applications) .043\" Ductil Napier Second, 3mm Oil\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 40px;\"\u003e\n\u003ctd style=\"height: 40px;\" height=\"40\" class=\"xl65\"\u003e\u003cspan\u003e\u003cstrong\u003eBearings:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 40px;\" class=\"xl66\"\u003e\u003cspan\u003eClevite H-Series Main \u0026amp; Rods\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 31px;\"\u003e\n\u003ctd style=\"height: 31px;\" height=\"31\" class=\"xl65\"\u003e\u003cspan\u003e\u003cstrong\u003eMain Studs:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 31px;\" class=\"xl66\"\u003e\u003cspan\u003eARP \u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan id=\"docs-internal-guid-ff7e31f8-5259-062b-ae32-cbcb4d4326ff\"\u003eLME Standard Shortblock Blueprinting Process:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable border=\"1\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"*\"\u003e \u003ccol width=\"*\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBlock is fully deburred \u0026amp; inspected for flaws\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCylinders diamond honed with torque plates for optimal clearance per application\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCrankshaft journals indexed \u0026amp; trued to exact tolerance\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOptimal cylinder geometry achieved with diamond hone and surface finish verified with profilometer\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eChamfered oil holes for improved oiling to bearings\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCylinders machined for rod clearance per application\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCrankshaft journals polished to 2 Ra or better surface finish\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBlock and components meticulously deburred \u0026amp; cleaned after machining process\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCrankshaft balanced within ¼ oz-in tolerance\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll five main bearings \u0026amp; all eight rod bearing clearances measured and adjusted for application\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eConnecting rod housing bores checked \u0026amp; adjusted for optimal roundness \u0026amp; size\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRing are precision file fit per application\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePiston pin bores measured \u0026amp; adjusted for application\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCam bearings installed and test cam fitted to ensure smooth rotation\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBlock aline honed and set to low of spec for maximun bearing crush\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll oil galley plugs and dowel pins installed\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDeck surfaces machined perpendicular to mains \u0026amp; deck height set for optimal quench\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMeticulous final assembly of shortblock\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCylinders bored (when applicable) on 4 axis CNC perpendicular to mains giving you a true 90\u003csup\u003eo\u003c\/sup\u003e  V8\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll tolerances, clearances, machining specs, and part numbers are recorded and documented in build sheet\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Late Model Engines","offers":[{"title":"Default Title","offer_id":45164710363159,"sku":"LME DART SHP PRO 388\" 2000 Shortblock","price":17999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/7796\/3799\/files\/DSC00459_copy_2_dd11a032-0caa-4c2b-8f61-33fd1850e451.png?v=1779565473"},{"product_id":"lme-lsr-400-1800hp","title":"LME LSR 400\" 1800HP","description":"\u003cp\u003eOur 400\" LSR Shortblock is a proven combination to get more cubic inches and power for your ride. This block will go into any LS-powered vehicle! Any LS1,LS2,LS3,LSA,LS7 or LS9 can be pulled out and replaced with this stout unit! This engine is set up for a forced induction application. Supercharger, turbos, procharger it doesn’t matter this engine will take it. The aluminum block saves weight for those applications in need of weight savings.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable border=\"0\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"141\"\u003e \u003ccol width=\"299\"\u003e \u003ccol width=\"139\"\u003e \u003ccol width=\"334\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"xl66\" width=\"141\" height=\"20\"\u003e\u003cspan\u003e\u003cstrong\u003eDisplacement:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd width=\"299\"\u003e\u003cspan\u003e400\"\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl66\" width=\"139\"\u003e\u003cspan\u003e\u003cstrong\u003eBore:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl69\" width=\"334\"\u003e\u003cspan\u003e4.125\"\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"xl66\" height=\"20\"\u003e\u003cspan\u003e\u003cstrong\u003eProven Power Rating:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1800 HP\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl66\"\u003e\u003cspan\u003e\u003cstrong\u003eStroke:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl67\"\u003e\u003cspan\u003e3.750\"\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"xl66\" height=\"20\"\u003e\u003cspan\u003e\u003cstrong\u003eCompression Ratio:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e10.5:1 w\/ 64cc Chamber\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl65\"\u003e\u003cspan\u003e\u003cstrong\u003eRod Length\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl67\"\u003e\u003cspan\u003e6.125\"\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"xl68\" width=\"141\" height=\"40\"\u003e\u003cspan\u003e\u003cstrong\u003eCylinder Head Compatibility:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl67\"\u003e\u003cspan\u003eAny LS\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl65\"\u003e\u003cspan\u003e\u003cstrong\u003eOil System Type:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl67\"\u003e\u003cspan\u003eWet or Dry\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003chr\u003e\n\u003ctable border=\"0\" cellspacing=\"0\" cellpadding=\"0\" style=\"width: 100.088%; height: 278px;\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"141\" style=\"width: 24.9117%;\"\u003e \u003ccol width=\"299\" style=\"width: 52.8269%;\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 20px;\"\u003e\n\u003ctd class=\"xl65\" height=\"20\" style=\"height: 20px;\"\u003e\u003cspan\u003e\u003cstrong\u003eBlock:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl66\" style=\"height: 20px;\"\u003e\u003cspan\u003eConcept Performance LSR Block\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 40px;\"\u003e\n\u003ctd class=\"xl65\" height=\"40\" style=\"height: 40px;\"\u003e\u003cspan\u003e\u003cstrong\u003eCrankshaft:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl66\" style=\"height: 40px;\"\u003e\u003cspan\u003eCallies APEX 8 Counterweight w\/ LME Blueprinting Process\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 40px;\"\u003e\n\u003ctd class=\"xl65\" height=\"40\" style=\"height: 40px;\"\u003e\u003cspan\u003e\u003cstrong\u003eConnecting Rods:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl66\" style=\"height: 40px;\"\u003e\u003cspan\u003eBoostline 6.125 I-Beam w\/ARP  Bolts\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 40px;\"\u003e\n\u003ctd class=\"xl65\" height=\"40\" style=\"height: 40px;\"\u003e\u003cspan\u003e\u003cstrong\u003ePistons:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl66\" style=\"height: 40px;\"\u003e\u003cspan\u003eLME\/Diamond 2K Custom Forged FI w\/Gas Ports (.300\" material above top ring land)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 27px;\"\u003e\n\u003ctd class=\"xl65\" height=\"27\" style=\"height: 27px;\"\u003e\u003cspan\u003e\u003cstrong\u003eWrist Pins:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl66\" style=\"height: 27px;\"\u003e\u003cspan\u003eTrend H-13 Tool Steel Heavy Wall .250\"\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 40px;\"\u003e\n\u003ctd class=\"xl65\" height=\"40\" style=\"height: 40px;\"\u003e\u003cspan\u003e\u003cstrong\u003eRing Pack:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl66\" style=\"height: 40px;\"\u003e\u003cspan\u003eTotal Seal 1.5mm AP Stainless Top (for high heat applications) .043\" Ductil Napier Second, 3mm Oil\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 40px;\"\u003e\n\u003ctd class=\"xl65\" height=\"40\" style=\"height: 40px;\"\u003e\u003cspan\u003e\u003cstrong\u003eBearings:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl66\" style=\"height: 40px;\"\u003e\u003cspan\u003eClevite H-Series Main \u0026amp; Rods\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 31px;\"\u003e\n\u003ctd class=\"xl65\" height=\"31\" style=\"height: 31px;\"\u003e\u003cspan\u003e\u003cstrong\u003eMain Studs:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl66\" style=\"height: 31px;\"\u003e\u003cspan\u003eARP \u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan id=\"docs-internal-guid-ff7e31f8-5259-062b-ae32-cbcb4d4326ff\"\u003eLME Standard Shortblock Blueprinting Process:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable border=\"1\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"*\"\u003e \u003ccol width=\"*\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBlock is fully deburred \u0026amp; inspected for flaws\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCylinders diamond honed with torque plates for optimal clearance per application\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCrankshaft journals indexed \u0026amp; trued to exact tolerance\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOptimal cylinder geometry achieved with diamond hone and surface finish verified with profilometer\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eChamfered oil holes for improved oiling to bearings\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCylinders machined for rod clearance per application\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCrankshaft journals polished to 2 Ra or better surface finish\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBlock and components meticulously deburred \u0026amp; cleaned after machining process\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCrankshaft balanced within ¼ oz-in tolerance\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll five main bearings \u0026amp; all eight rod bearing clearances measured and adjusted for application\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eConnecting rod housing bores checked \u0026amp; adjusted for optimal roundness \u0026amp; size\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRing are precision file fit per application\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePiston pin bores measured \u0026amp; adjusted for application\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCam bearings installed and test cam fitted to ensure smooth rotation\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBlock aline honed and set to low of spec for maximun bearing crush\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll oil galley plugs and dowel pins installed\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDeck surfaces machined perpendicular to mains \u0026amp; deck height set for optimal quench\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMeticulous final assembly of shortblock\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCylinders bored (when applicable) on 4 axis CNC perpendicular to mains giving you a true 90\u003csup\u003eo\u003c\/sup\u003e  V8\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll tolerances, clearances, machining specs, and part numbers are recorded and documented in build sheet\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Late Model Engines","offers":[{"title":"Default Title","offer_id":45164710395927,"sku":"LME LSR 400\" 1800 Shortblock","price":16796.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/7796\/3799\/files\/LSR_99485f1f-58da-4b64-aa29-689f92a60119.png?v=1779565477"},{"product_id":"lme-dart-shp-pro-400-1400hp","title":"LME DART SHP PRO 400\" 1400HP","description":"\u003cp\u003eOur 400\" DART SHP PRO Shortblock is a proven combination to get more cubic inches and power for your ride. This block will go into any LS-powered vehicle! Any LS1,LS2,LS3,LSA,LS7 or LS9 can be pulled out and replaced with this stout unit! This engine is set up for a forced induction application. Supercharger, turbos, procharger it doesn’t matter this engine will take it. The aluminum block saves weight for those applications in need of weight savings.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable border=\"0\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"141\"\u003e \u003ccol width=\"299\"\u003e \u003ccol width=\"139\"\u003e \u003ccol width=\"334\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"xl66\" width=\"141\" height=\"20\"\u003e\u003cspan\u003e\u003cstrong\u003eDisplacement:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd width=\"299\"\u003e\u003cspan\u003e400\"\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl66\" width=\"139\"\u003e\u003cspan\u003e\u003cstrong\u003eBore:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl69\" width=\"334\"\u003e\u003cspan\u003e4.125\"\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"xl66\" height=\"20\"\u003e\u003cspan\u003e\u003cstrong\u003eProven Power Rating:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1400 HP\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl66\"\u003e\u003cspan\u003e\u003cstrong\u003eStroke:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl67\"\u003e\u003cspan\u003e3.750\"\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"xl66\" height=\"20\"\u003e\u003cspan\u003e\u003cstrong\u003eCompression Ratio:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e10.5:1 w\/ 64cc Chamber\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl65\"\u003e\u003cspan\u003e\u003cstrong\u003eRod Length\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl67\"\u003e\u003cspan\u003e6.125\"\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"xl68\" width=\"141\" height=\"40\"\u003e\u003cspan\u003e\u003cstrong\u003eCylinder Head Compatibility:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl67\"\u003e\u003cspan\u003eAny LS\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl65\"\u003e\u003cspan\u003e\u003cstrong\u003eOil System Type:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl67\"\u003e\u003cspan\u003eWet or Dry\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003chr\u003e\n\u003ctable border=\"0\" cellspacing=\"0\" cellpadding=\"0\" style=\"width: 100.088%; height: 278px;\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"141\" style=\"width: 24.9117%;\"\u003e \u003ccol width=\"299\" style=\"width: 52.8269%;\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 20px;\"\u003e\n\u003ctd class=\"xl65\" height=\"20\" style=\"height: 20px;\"\u003e\u003cspan\u003e\u003cstrong\u003eBlock:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl66\" style=\"height: 20px;\"\u003e\u003cspan\u003eDART SHP PRO\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 40px;\"\u003e\n\u003ctd class=\"xl65\" height=\"40\" style=\"height: 40px;\"\u003e\u003cspan\u003e\u003cstrong\u003eCrankshaft:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl66\" style=\"height: 40px;\"\u003e\u003cspan\u003eCallies 4340 Compstar 8 Counterweight w\/ LME Blueprinting Process\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 40px;\"\u003e\n\u003ctd class=\"xl65\" height=\"40\" style=\"height: 40px;\"\u003e\u003cspan\u003e\u003cstrong\u003eConnecting Rods:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl66\" style=\"height: 40px;\"\u003e\u003cspan\u003eCallies Compstar XD (1600HP Rated)w\/ARP  Bolts\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 40px;\"\u003e\n\u003ctd class=\"xl65\" height=\"40\" style=\"height: 40px;\"\u003e\u003cspan\u003e\u003cstrong\u003ePistons:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl66\" style=\"height: 40px;\"\u003e\u003cspan\u003eLME\/Diamond 2K Custom Forged FI w\/Gas Ports (.300\" material above top ring land)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 27px;\"\u003e\n\u003ctd class=\"xl65\" height=\"27\" style=\"height: 27px;\"\u003e\u003cspan\u003e\u003cstrong\u003eWrist Pins:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl66\" style=\"height: 27px;\"\u003e\u003cspan\u003eTrend H-13 Tool Steel Heavy Wall .250\"\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 40px;\"\u003e\n\u003ctd class=\"xl65\" height=\"40\" style=\"height: 40px;\"\u003e\u003cspan\u003e\u003cstrong\u003eRing Pack:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl66\" style=\"height: 40px;\"\u003e\u003cspan\u003eTotal Seal 1.5mm AP Stainless Top (for high heat applications) .043\" Ductil Napier Second, 3mm Oil\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 40px;\"\u003e\n\u003ctd class=\"xl65\" height=\"40\" style=\"height: 40px;\"\u003e\u003cspan\u003e\u003cstrong\u003eBearings:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl66\" style=\"height: 40px;\"\u003e\u003cspan\u003eClevite H-Series Main \u0026amp; Rods\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 31px;\"\u003e\n\u003ctd class=\"xl65\" height=\"31\" style=\"height: 31px;\"\u003e\u003cspan\u003e\u003cstrong\u003eMain Studs:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl66\" style=\"height: 31px;\"\u003e\u003cspan\u003eARP \u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan id=\"docs-internal-guid-ff7e31f8-5259-062b-ae32-cbcb4d4326ff\"\u003eLME Standard Shortblock Blueprinting Process:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable border=\"1\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"*\"\u003e \u003ccol width=\"*\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBlock is fully deburred \u0026amp; inspected for flaws\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCylinders diamond honed with torque plates for optimal clearance per application\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCrankshaft journals indexed \u0026amp; trued to exact tolerance\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOptimal cylinder geometry achieved with diamond hone and surface finish verified with profilometer\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eChamfered oil holes for improved oiling to bearings\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCylinders machined for rod clearance per application\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCrankshaft journals polished to 2 Ra or better surface finish\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBlock and components meticulously deburred \u0026amp; cleaned after machining process\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCrankshaft balanced within ¼ oz-in tolerance\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll five main bearings \u0026amp; all eight rod bearing clearances measured and adjusted for application\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eConnecting rod housing bores checked \u0026amp; adjusted for optimal roundness \u0026amp; size\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRing are precision file fit per application\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePiston pin bores measured \u0026amp; adjusted for application\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCam bearings installed and test cam fitted to ensure smooth rotation\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBlock aline honed and set to low of spec for maximun bearing crush\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll oil galley plugs and dowel pins installed\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDeck surfaces machined perpendicular to mains \u0026amp; deck height set for optimal quench\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMeticulous final assembly of shortblock\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCylinders bored (when applicable) on 4 axis CNC perpendicular to mains giving you a true 90\u003csup\u003eo\u003c\/sup\u003e  V8\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll tolerances, clearances, machining specs, and part numbers are recorded and documented in build sheet\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Late Model Engines","offers":[{"title":"Default Title","offer_id":45164710559767,"sku":"LME DART SHP PRO 400\" 1400 Shortblock","price":13799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/7796\/3799\/files\/DSC00459_copy_2_69d44820-4788-4ba8-bbe8-552001fa73e3.png?v=1779565481"},{"product_id":"lme-dart-shp-pro-400-1800hp","title":"LME DART SHP PRO 400\" 1800HP","description":"\u003cp\u003eOur 400\" DART SHP PRO Shortblock is a proven combination to get more cubic inches and power for your ride. This block will go into any LS-powered vehicle! Any LS1,LS2,LS3,LSA,LS7 or LS9 can be pulled out and replaced with this stout unit! This engine is set up for a forced induction application. Supercharger, turbos, procharger it doesn’t matter this engine will take it. The aluminum block saves weight for those applications in need of weight savings.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable cellpadding=\"0\" cellspacing=\"0\" border=\"0\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"141\"\u003e \u003ccol width=\"299\"\u003e \u003ccol width=\"139\"\u003e \u003ccol width=\"334\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" width=\"141\" class=\"xl66\"\u003e\u003cspan\u003e\u003cstrong\u003eDisplacement:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd width=\"299\"\u003e\u003cspan\u003e400\"\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd width=\"139\" class=\"xl66\"\u003e\u003cspan\u003e\u003cstrong\u003eBore:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd width=\"334\" class=\"xl69\"\u003e\u003cspan\u003e4.125\"\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" class=\"xl66\"\u003e\u003cspan\u003e\u003cstrong\u003eProven Power Rating:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1800 HP\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl66\"\u003e\u003cspan\u003e\u003cstrong\u003eStroke:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl67\"\u003e\u003cspan\u003e3.625\"\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"20\" class=\"xl66\"\u003e\u003cspan\u003e\u003cstrong\u003eCompression Ratio:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e10.5:1 w\/ 64cc Chamber\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl65\"\u003e\u003cspan\u003e\u003cstrong\u003eRod Length\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl67\"\u003e\u003cspan\u003e6.125\"\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd height=\"40\" width=\"141\" class=\"xl68\"\u003e\u003cspan\u003e\u003cstrong\u003eCylinder Head Compatibility:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl67\"\u003e\u003cspan\u003eLT1, LT4\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl65\"\u003e\u003cspan\u003e\u003cstrong\u003eOil System Type:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"xl67\"\u003e\u003cspan\u003eWet or Dry\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003chr\u003e\n\u003ctable style=\"width: 100.088%; height: 278px;\" cellpadding=\"0\" cellspacing=\"0\" border=\"0\"\u003e\n\u003ccolgroup\u003e \u003ccol style=\"width: 24.9117%;\" width=\"141\"\u003e \u003ccol style=\"width: 52.8269%;\" width=\"299\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 20px;\"\u003e\n\u003ctd style=\"height: 20px;\" height=\"20\" class=\"xl65\"\u003e\u003cspan\u003e\u003cstrong\u003eBlock:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 20px;\" class=\"xl66\"\u003e\u003cspan\u003eDART SHP PRO\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 40px;\"\u003e\n\u003ctd style=\"height: 40px;\" height=\"40\" class=\"xl65\"\u003e\u003cspan\u003e\u003cstrong\u003eCrankshaft:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 40px;\" class=\"xl66\"\u003e\u003cspan\u003eCallies APEX 8 Counterweight w\/ LME Blueprinting Process\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 40px;\"\u003e\n\u003ctd style=\"height: 40px;\" height=\"40\" class=\"xl65\"\u003e\u003cspan\u003e\u003cstrong\u003eConnecting Rods:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 40px;\" class=\"xl66\"\u003e\u003cspan\u003eBoostline 6.125 I-Beam w\/ARP  Bolts\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 40px;\"\u003e\n\u003ctd style=\"height: 40px;\" height=\"40\" class=\"xl65\"\u003e\u003cspan\u003e\u003cstrong\u003ePistons:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 40px;\" class=\"xl66\"\u003e\u003cspan\u003eLME\/Diamond 2K Custom Forged FI w\/Gas Ports (.300\" material above top ring land)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 27px;\"\u003e\n\u003ctd style=\"height: 27px;\" height=\"27\" class=\"xl65\"\u003e\u003cspan\u003e\u003cstrong\u003eWrist Pins:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 27px;\" class=\"xl66\"\u003e\u003cspan\u003eTrend H-13 Tool Steel Heavy Wall .250\"\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 40px;\"\u003e\n\u003ctd style=\"height: 40px;\" height=\"40\" class=\"xl65\"\u003e\u003cspan\u003e\u003cstrong\u003eRing Pack:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 40px;\" class=\"xl66\"\u003e\u003cspan\u003eTotal Seal 1.5mm AP Stainless Top (for high heat applications) .043\" Ductil Napier Second, 3mm Oil\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 40px;\"\u003e\n\u003ctd style=\"height: 40px;\" height=\"40\" class=\"xl65\"\u003e\u003cspan\u003e\u003cstrong\u003eBearings:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 40px;\" class=\"xl66\"\u003e\u003cspan\u003eClevite H-Series Main \u0026amp; Rods\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 31px;\"\u003e\n\u003ctd style=\"height: 31px;\" height=\"31\" class=\"xl65\"\u003e\u003cspan\u003e\u003cstrong\u003eMain Studs:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 31px;\" class=\"xl66\"\u003e\u003cspan\u003eARP \u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cstrong\u003e\u003cspan id=\"docs-internal-guid-ff7e31f8-5260-a434-7665-8fdfcfec6468\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan id=\"docs-internal-guid-ff7e31f8-5259-062b-ae32-cbcb4d4326ff\"\u003eLME Standard Shortblock Blueprinting Process:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable border=\"1\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"*\"\u003e \u003ccol width=\"*\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBlock is fully deburred \u0026amp; inspected for flaws\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCylinders diamond honed with torque plates for optimal clearance per application\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCrankshaft journals indexed \u0026amp; trued to exact tolerance\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOptimal cylinder geometry achieved with diamond hone and surface finish verified with profilometer\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eChamfered oil holes for improved oiling to bearings\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCylinders machined for rod clearance per application\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCrankshaft journals polished to 2 Ra or better surface finish\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBlock and components meticulously deburred \u0026amp; cleaned after machining process\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCrankshaft balanced within ¼ oz-in tolerance\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll five main bearings \u0026amp; all eight rod bearing clearances measured and adjusted for application\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eConnecting rod housing bores checked \u0026amp; adjusted for optimal roundness \u0026amp; size\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRing are precision file fit per application\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePiston pin bores measured \u0026amp; adjusted for application\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCam bearings installed and test cam fitted to ensure smooth rotation\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBlock aline honed and set to low of spec for maximun bearing crush\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll oil galley plugs and dowel pins installed\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDeck surfaces machined perpendicular to mains \u0026amp; deck height set for optimal quench\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMeticulous final assembly of shortblock\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCylinders bored (when applicable) on 4 axis CNC perpendicular to mains giving you a true 90\u003csup\u003eo\u003c\/sup\u003e  V8\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll tolerances, clearances, machining specs, and part numbers are recorded and documented in build sheet\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Late Model Engines","offers":[{"title":"Default Title","offer_id":45164711772183,"sku":"LME DART SHP PRO 400\" 1800 Shortblock","price":14999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/7796\/3799\/files\/DSC00459_copy_2_6adee53f-20d9-4d37-9e42-5ef1b719899e.png?v=1779565486"},{"product_id":"ls3-lsa-and-ls9-head-porting-service","title":"LS3, LSA, and LS9 HEAD PORTING SERVICE","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eMany hours of R\u0026amp;D have gone into the development of this powerful LS3 CNC program. With stout flow numbers and an efficient port shape, the LME CNC ported LS3 offering is truly bolt on performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e## By specifying your cam lift LME will assemble your cylinder heads with the proper spring installed height. This will result in optimal spring pressures and coil bind distance for maximum performance. Please include rocker ratio to ensure accuracy. (example:  .650\" lift with 1.8 ratio intake and exhaust)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e *All Cylinder Heads Are Priced As ASSEMBLED Pairs\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e **CORE CHARGE WILL BE REFUNDED WHEN USEABLE CORES ARE RETURNED BY CUSTOMER\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable cellpadding=\"0\" cellspacing=\"0\" border=\"1\" dir=\"ltr\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"100\"\u003e \u003ccol width=\"100\"\u003e \u003ccol width=\"100\"\u003e \u003ccol width=\"100\"\u003e \u003ccol width=\"100\"\u003e \u003ccol width=\"100\"\u003e \u003ccol width=\"100\"\u003e \u003ccol width=\"100\"\u003e \u003ccol width=\"100\"\u003e \u003ccol width=\"100\"\u003e \u003ccol width=\"100\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-sheets-value='[null,2,\"FLOW NUMBERS WITH 4.125\\\" BORE @ 28\\\" WATER\"]' rowspan=\"1\" colspan=\"11\"\u003e\u003cspan\u003eFLOW NUMBERS WITH 4.125\" BORE @ 28\" WATER\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-sheets-value='[null,2,\"LIFT\"]'\u003e\u003cspan\u003eLIFT\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd data-sheets-value='[null,2,\".100\\\"\"]'\u003e\u003cspan\u003e.100\"\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd data-sheets-value='[null,2,\".200\\\"\"]'\u003e\u003cspan\u003e.200\"\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd data-sheets-value='[null,2,\".300\\\"\"]'\u003e\u003cspan\u003e.300\"\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd data-sheets-value='[null,2,\".400\\\"\"]'\u003e\u003cspan\u003e.400\"\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd data-sheets-value='[null,2,\".500\\\"\"]'\u003e\u003cspan\u003e.500\"\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd data-sheets-value='[null,2,\".600\\\"\"]'\u003e\u003cspan\u003e.600\"\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd data-sheets-value='[null,2,\".700\\\"\"]'\u003e\u003cspan\u003e.700\"\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd data-sheets-value='[null,2,\".800\\\"\"]'\u003e \u003c\/td\u003e\n\u003ctd data-sheets-value='[null,2,\".900\\\"\"]'\u003e\u003cstrong\u003e\u003cspan\u003eVALVE SIZE\u003c\/span\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd data-sheets-value='[null,2,\"1.00\\\"\"]'\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-sheets-value='[null,2,\"INTAKE\"]'\u003e\u003cspan\u003eINTAKE\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd data-sheets-value=\"[null,3,null,200]\"\u003e\u003cspan\u003e 89\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd data-sheets-value=\"[null,3,null,300]\"\u003e\u003cspan\u003e 155\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd data-sheets-value=\"[null,3,null,400]\"\u003e\u003cspan\u003e 222\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd data-sheets-value=\"[null,3,null,500]\"\u003e\u003cspan\u003e 284\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd data-sheets-value=\"[null,3,null,600]\"\u003e\u003cspan\u003e 328\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd data-sheets-value=\"[null,3,null,700]\"\u003e\u003cspan\u003e 354\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd data-sheets-value=\"[null,3,null,800]\"\u003e\u003cspan\u003e 365\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e 2.165\"\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-sheets-value='[null,2,\"EXHAUST\"]'\u003e\u003cspan\u003eEXHAUST\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e 70\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e 127\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e 174\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e 212\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e 244\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e 265\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e 274\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e 1.600\"\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e*Flowed with radius inlet intake\/no pipe exhaust\u003c\/p\u003e\n\u003ctable border=\"10\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"205\"\u003e \u003ccol width=\"162\"\u003e \u003ccol width=\"129\"\u003e \u003ccol width=\"124\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIntake Volume (cc)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e281\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRocker Config.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eGM LS3\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eExhaust Volume (cc)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e98\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIntake Port Config.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eGM LS3\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eChamber Volume (cc)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e70 cc\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eHead Bolts\/ Cyl.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e4\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eValve Guide Material\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFactory Steel\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eValve Angle (degrees)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e15° In.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e15° Ex.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eLME Standard Head Porting Process\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003ccolgroup\u003e \u003ccol width=\"364\"\u003e \u003ccol width=\"304\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eClean carbon from intake exhaust and chambers (used cores)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThrough inspection\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDebur sharp edges\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eValve guide clearance measured and adjusted for application\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCNC ported intake exhaust and chambers\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCompetition valve job\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eValve job hand blended into ports\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCombustion chambers measured and adjusted for application\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMeticulous final cleaning of cylinder head and components\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIntake valves back cut with optimal angle for application\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eHeads assembled and spring pressure set up for specific cam lifts\/application\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eParts: Reuse GM Intake valves, REV Stainless Severe Duty Exhaust Valves, LME .660\" Lift Spring Kit w\/ Titanium Retainers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!----\u003e","brand":"Late Model Engines","offers":[{"title":"Default Title","offer_id":45164712558615,"sku":"sku-48987949957398","price":2619.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/7796\/3799\/files\/gmls3headset_3.jpg?v=1779565510"},{"product_id":"lme-billet-ls-front-cover","title":"LME BILLET LS FRONT COVER","description":"\u003cp\u003e\u003cspan\u003eLME Billet LS front cover! We have been asked many times about having this product! We decided it was time! We now have an LS Front cover that allows you to run a double roller timing set! We understand people want a better front cover than a factory one. Nice looking cars deserve nice looking engines! This front cover will ensure your engine is looking good as it performs!\u003c\/span\u003e\u003c\/p\u003e","brand":"Late Model Engines","offers":[{"title":"Natural Finish","offer_id":45164712591383,"sku":"sku-49210439336214","price":649.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":45164712624151,"sku":"sku-49210439368982","price":749.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/7796\/3799\/files\/DSC02649_copy.png?v=1779565511"},{"product_id":"lme-jesel-belt-drive-cam-sensor-bracket","title":"LME JESEL BELT DRIVE CAM SENSOR BRACKET.","description":"\u003cp\u003eOur Bracket is designed for the use of an LS with a Jesel Belt Drive. It lets you use a factory LS cam sensor with the jesel washer. You will need the jesel washer with the single tab. You can get the bracket with or without the washer.\u003c\/p\u003e","brand":"Late Model Engines","offers":[{"title":"Default Title","offer_id":45164713771031,"sku":"Bracket-LME LT 6.6L Accesso","price":295.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/7796\/3799\/files\/PIC00799_copy.png?v=1779565518"},{"product_id":"lt2-timing-chain-guide","title":"LT2 TIMING CHAIN GUIDE","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eJust like our normal LME Billet timing chain guide the LT2 guide allows you to delete off the factory tensioner that is known to fail. This will improve peace of mind and reliability. The LT2 guide is modified specifically for the LT2 oil pump to fit correctly.\u003c\/span\u003e\u003c\/p\u003e","brand":"Late Model Engines","offers":[{"title":"Default Title","offer_id":45164717277207,"sku":"Timing Set-LME LT2 Timing Chain Guide","price":239.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/7796\/3799\/files\/DSC00209copy.png?v=1779565512"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/7796\/3799\/collections\/IMG-3941.png?v=1778934899","url":"https:\/\/fireballperformanceparts.com\/collections\/cts-v-performance.oembed","provider":"Fireball Performance Parts","version":"1.0","type":"link"}